Automatic Water Softener for Water Treatment RO System
|FOB Price:||US $500 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $500/ Piece|
|Payment Terms:||L/C, T/T, Western Union, Paypal, Money Gram|
- Certification: ISO9001, CE
- Application: Industry
- Material: Stainless Steel
- Size: Can Be Customized
- Transport Package: Wooden Package
- Origin: China
- Salt Rejection Rate: 99.0%
- Capacity: 400 Gallon
- Pakage: Wooden Case
- Type: Jx
- Specification: can be customized
------Professional manufacture of filter and filter element since 2004!
------Superior quality products with reasonable price!
------Best pre-sale and after-sale service!
Water softener is a device which removes the calcium and magnesium ions in water by using sodium cation exchange resin so as to reducing the hardness raw water.
By reducing the hardness of the water can avoid the fouling of carbonates in the pipeline, container and boiler which can saves the investment costs while ensures smooth production. At present, water softener has been widely used in steam boilers, hot water boilers, heat exchangers, steam condensers, air conditioning and other water supply system equipment.
How it works
Raw water, at a certain pressure (0.3-0.4Mpa) and flow rate, enters into the vessel containing ion exchange resin (resin tank) through the control valve chamber. Then the resin Na + contained in the water exchanged with cations (Ca2 +, Mg2 +, Fe2 + ...... etc) in the water. Then the ion content of Ca2 + and Mg2 + can meet the outlet requirements to achieve the softening of hard water.
After the failure of the resin, the backwashing procedure is operated before the regeneration of resin. There are two purposes of backwashing, first is loosen the resin layer which is conducive to contact of the resin particles and regeneration liquid; second is wash out the suspended solids accumulated on the resin surface and broken resin so as to lower the flow resistance of the switch.
3. Salt regeneration
The regeneration salt solution flows through the failure resin layer at a certain concentration and flow rate to restore its exchange capacity.
4. Slow washing
After the intake of regeneration fluid, there are regeneration salt solution which are not involved in the exchange. So it need to be cleaned by water with the flow rate less than or equal to the regeneration fluid flow rate.
The purpose is to remove the regeneration waste in the residual resin layer. Usually, it is washed by the water with the normal flow rate.
Inject the water that is needed for one regeneration.
- Automatic control, continuous water production, easy to operate, safe and reliable.
- High adaptability: for water with high hardness≤30rrlmol / L, it can be softened to ≤0 03mr "ol / L.
- Less regeneration time, less using amount of resin and salt, less running cost
- Low weight and small occupied spaces
- Significant energy saving
|Water output||Valve type||Tank type||Salt tank type||Resin Qty.||Water distributor||Water inlet/outlet|
1. All the products are packed in seaworthy wooden cases.
2. Any special requirement for package, please feel free to tell us.
JX Filtration offer any delivery method for different quantity.